|
|
|
National Stock Number:
5320-01-513-5216
Federal Supply Class:
5320
National Item Identification Number:
015135216
Description:
PIN-RIVET
Detail:
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
|
Manufacturer Information:
| AIC-L-771-10-14 | 06725 | SPS TECHNOLOGIES, LLC | | HKT631YB-10-14 | 56878 | SPS TECHNOLOGIES, LLC | | HLT631YB-10-14 | 06725 | SPS TECHNOLOGIES, LLC | | HLT631YB-10-14 | 0PTK6 | SPS TECHNOLOGIES INC | | HLT631YB-10-14 | 56878 | SPS TECHNOLOGIES, LLC | | HLT631YB-10-14 | 73197 | HI-SHEAR CORPORATION | | HLT631YC-10-14 | 06725 | SPS TECHNOLOGIES, LLC | | HLT631YC-10-14 | 0PTK6 | SPS TECHNOLOGIES INC | | HP4758D5-14 | 0ZC92 | HEARTLAND PRECISION FASTENERS INC | | HLT631YC-10-14 | 56878 | SPS TECHNOLOGIES, LLC | | ST3M758D5-14 | 58998 | FASTENER INNOVATION TECHNOLOGY, INC. | | ST3M758D5-14 | 76301 | THE BOEING COMPANY | | HLT631YB-10-14 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC |
|
Techincal Specification:
| CRITICALITY CODE JUSTIFICATION | AGAV | | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | FASTENER LENGTH | 1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM | | GRIP LENGTH | 0.865 INCHES MINIMUM AND 0.880 INCHES MAXIMUM | | HEAD MAJOR DIAMETER | 0.4689 INCHES MINIMUM AND 0.4739 INCHES MAXIMUM | | HEAD STYLE | FLUSH COUNTERSUNK | | LUBRICATION | SOLID FILM AND CETYL ALCOHOL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP XM-13 OVERALL | | NOMINAL THREAD SIZE | 0.3125 INCHES | | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN-RIVET,THREDED,SHEAR,100 DEGREE C'SUNK HEAD,HEX POINT DRIVE | | SHANK DIAMETER | 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM | | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED | | WIDTH BETWEEN FLATS | 0.1270 INCHES MINIMUM AND 0.1295 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 24 |
|
|