|
|
|
National Stock Number:
5320-01-546-8604
Federal Supply Class:
5320
National Item Identification Number:
015468604
Description:
PIN-RIVET
Detail:
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
|
Manufacturer Information:
| HLT123-10-22 | 06725 | SPS TECHNOLOGIES, LLC | | HLT123-10-22 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HLT123-10-22 | 17446 | HUCK INTERNATIONAL, INC | | HLT123-10-22 | 56878 | SPS TECHNOLOGIES, LLC | | HLT123-10-22 | 60516 | WEST COAST AEROSPACE, INC. | | HLT123-10-22 | 73197 | HI-SHEAR CORPORATION | | HLT123-10-22 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HLT123-10-22 | 98897 | LOCKHEED MARTIN CORP | | HLT123-10-22 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | FASTENER LENGTH | 1.915 INCHES MINIMUM AND 1.930 INCHES MAXIMUM | | GRIP LENGTH | 1.370 INCHES MINIMUM AND 1.385 INCHES MAXIMUM | | HEAD MAJOR DIAMETER | 0.489 INCHES MAXIMUM | | HEAD STYLE | FLUSH COUNTERSUNK | | LUBRICATION | CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4140 OR STEEL COMP 8740 OVERALL | | NOMINAL THREAD SIZE | 0.312 INCHES | | SHANK DIAMETER | 0.327 INCHES MINIMUM AND 0.328 INCHES MAXIMUM | | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED | | SHEAR STRENGTH | 108000 SINGLE POUNDS PER SQUARE INCH | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES DESIGNATOR | UNJF | | WIDTH BETWEEN FLATS | 0.160 INCHES MINIMUM AND 0.180 INCHES MAXIMUM |
|
|