| MATERIAL | STEEL EJECTOR SPRING |
| STEEL COMP 305 EYELET |
| STEEL COMP 4130 GROMMET |
| STEEL PIN |
| STEEL COMP 4130 STUD |
| STEEL COMP 302 WASHER |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE EJECTOR SPRING |
| QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE EYELET |
| ASTM A331 ASSN STD SINGLE MATERIAL RESPONSE GROMMET |
| QQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE PIN |
| ASTM A331 ASSN STD SINGLE MATERIAL RESPONSE STUD |
| QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE WASHER |
| SURFACE TREATMENT | CADMIUM AND |
| CHROMATE EJECTOR SPRING |
| CADMIUM AND |
| CHROMATE EYELET |
| PASSIVATE GROMMET |
| CHROMATE PIN |
| CHROMATE STUD |
| PASSIVATE WASHER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE EJECTOR SPRING |
| QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE EYELET |
| QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE GROMMET |
| QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE PIN |
| QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE STUD |
| QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE WASHER |
| TURNLOCK STUD HEAD STYLE | STUD HEAD |
| DIAMETER | 0.377 INCHES MINIMUM AND |
| 0.384 INCHES MAXIMUM |
| STUD HEAD HEIGHT | 0.092 INCHES NOMINAL |
| STUD ASSEMBLY STYLE | STUD ASSEMBLY |
| DISTANCE FROM ENGAGING MEMBER TO LARGEST BEARING SURFACE OF HEAD | 0.575 INCHES MINIMUM AND |
| 0.585 INCHES MAXIMUM |
| EYELET OUTSIDE DIAMETER | 0.365 INCHES MINIMUM AND |
| 0.373 INCHES MAXIMUM |
| EYELET LENGTH | 0.145 INCHES MINIMUM AND |
| 0.156 INCHES MAXIMUM |
| SECURING DEVICE TYPE | WASHER |
| DRIVE TYPE | SLOTTED |
| MATERIAL ACCOMMODATED THICKNESS | 0.443 INCHES MINIMUM AND |
| 0.453 INCHES MAXIMUM |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 71286 |
| DESIGN CONTROL REFERENCE | 40S51A040-3A |