|
|
|
National Stock Number:
5330-00-240-6173
Federal Supply Class:
5330
National Item Identification Number:
002406173
Description:
SEAL,NONMETALLIC ROUND SECTION
Detail:
AN ITEM FABRICATED FROM NONMETALLIC MATERIAL DESIGNED TO BE USED WHERE THERE IS NO RELATIVE MOTION BETWEEN JOINED PARTS. ITEMS WITH A SOLID CROSS SECTION MUST BE A SINGLE PIECE WHOSE ENDS MAY HAVE BEEN SECURED TOGETHER TO FORM A SPECIFIC SHAPE. IT MAY BE FORMED TO SPECIFIC SHAPE WITH OR WITHOUT JOINTS. IT MAY BE A STRAIGHT ITEM OF A SPECIFIC LENGTH WITH END CUTS OR JOINTS. IT MAY HAVE A SOLID OR TUBULAR CROSS SECTION. EXCEPT FOR MOLDED CORNERS, END CUTS, AND MOUNTING FACILITIES SUCH AS MOUNTING HOLES, SLOTS, PRESS-FIT BUTTONS, OR THE LIKE, THE ITEM MUST BE OF ONE CONTINUOUS ROUND CROSS SECTION. IT MAY HAVE FABRIC, CORD OR METAL REINFORCEMENT. FOR STRAIGHT ITEMS WITH SQUARE END CUTS AND WITHOUT MOUNTING HOLES, SLOTS OR PRESS-FIT BUTTONS SEE RUBBER ROUND SECTION AND TUBING, NONMETALLIC. EXCLUDES GASKET AND PACKING, PREFORMED.
|
Manufacturer Information:
| 1655858 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| APERTURE WIDTH | 3.531 INCHES MINIMUM AND 3.593 INCHES MAXIMUM | | APERTURE LENGTH | 23.469 INCHES MINIMUM AND 23.531 INCHES MAXIMUM | | CONSTRUCTION | SOLID | | CROSS SECTION OUTSIDE DIAMETER | 0.139 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | CIRCULAR | | FABRICATION METHOD | SOLID | | INSIDE CORNER RADIUS | 0.968 INCHES NOMINAL | | OUTSIDE CORNER RADIUS | 1.108 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-R-2765 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL | | SPECIAL TEST FEATURES | SPLICE SHALL WITHSTAND A TENSILE STRENGTH TEST OF 700 PSI MIN WHEN TESTED IN ACCORDANCE WITH MIL-P-5516A PARAGRAPH 4.5.2.3 | | STYLE DESIGNATOR | NON-CIRCULAR |
|
|