|
|
|
National Stock Number:
5330-00-297-9321
Federal Supply Class:
5330
National Item Identification Number:
002979321
Description:
GASKET
Detail:
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR.
|
Manufacturer Information:
| 00874 | 14153 | DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA | | 196085PC1 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | MIL-R-2765 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| ELONGATION PERCENTAGE | 300 MAXIMUM | | APERTURE LENGTH | 8.210 INCHES NOMINAL | | APERTURE WIDTH | 2.530 INCHES NOMINAL | | BOLT HOLE QUANTITY | 10 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.522 INCHES MINIMUM AND 2.538 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 2.100 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | SOLID SINGLE OR COMPOSITION | | CROSS-SECTIONAL THICKNESS | 0.062 INCHES NOMINAL | | HARDNESS RATING | 25.0 SHORE DUROMETER A MINIMUM AND 35.0 SHORE DUROMETER A MAXIMUM OVERALL | | HOLE DIAMETER | 0.422 INCHES NOMINAL | | INSIDE CORNER RADIUS | 0.500 INCHES NOMINAL | | MATERIAL | RUBBER CHLOROPRENE CLASS CR OVERALL | | OUTSIDE CORNER RADIUS | 1.350 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 2.007 INCHES MINIMUM AND 2.023 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 1.065 INCHES NOMINAL | | OVERALL LENGTH | 9.902 INCHES MINIMUM AND 9.925 INCHES MAXIMUM | | OVERALL WIDTH | 4.230 INCHES NOMINAL | | STYLE DESIGNATOR | NON-CIRCULAR |
|
|