|
|
|
National Stock Number:
5330-00-592-8221
Federal Supply Class:
5330
National Item Identification Number:
005928221
Description:
GASKET
Detail:
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR.
|
Manufacturer Information:
| SMC121201 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR | | SMC121201P1 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR |
|
Techincal Specification:
| APERTURE LENGTH | 5.000 INCHES NOMINAL | | APERTURE WIDTH | 5.000 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 6.640 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 3.600 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | SOLID SINGLE OR COMPOSITION | | CROSS-SECTIONAL THICKNESS | 0.030 INCHES NOMINAL | | HARDNESS RATING | 35.0 SHORE DUROMETER A MINIMUM AND 45.0 SHORE DUROMETER A MAXIMUM OVERALL | | HOLE DIAMETER | 0.625 INCHES NOMINAL | | INSIDE CORNER RADIUS | 0.312 INCHES NOMINAL | | OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH | 0.200 INCHES NOMINAL | | OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH | 0.200 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 1.500 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 1.080 INCHES NOMINAL | | OVERALL LENGTH | 8.800 INCHES NOMINAL | | OVERALL WIDTH | 6.600 INCHES NOMINAL | | MATERIAL | RUBBER SYNTHETIC OVERALL | | SPECIAL FEATURES | EIGHT ADDITIONAL HOLES 0.204 IN. DIA 2 ON EACH W SIDE AND TWO ON EACH LENGTH SIDE SPACED 3.000 IN. CENTER TO CENTER ON CENTER LINES 1.800 IN. FROM LENGTH EDGE AND 0.280 IN. FROM EDGE ALONG WIDTH AND CENTER LINES 0.300 IN. FROM LENGTH EDGE AND 2.900 IN. FROM WIDTH EDGE ALONG LENGTH,TWO CENTRALLY LOCATED SLOTS ONE OPENING ON EACH WIDTH SIDE 1.600 IN. WIDE BY 1.500 IN. DEED W ITH 0.312 IN. RADIUS INSIDE CORNERS |
|
|