|
|
|
National Stock Number:
5330-00-822-4685
Federal Supply Class:
5330
National Item Identification Number:
008224685
Description:
RING,WIPER
Detail:
A CIRCULAR, SINGLE OR MULTIPIECE, RIGID, METALLIC OR NONMETALLIC ITEM HAVING A CENTRALLY LOCATED HOLE WITH A SHARP EDGE ON THE INSIDE PERIPHERY. IT IS SUPPLIED IN VARIOUS CROSS-SECTIONAL SHAPES AND IS DESIGNED TO BE INSTALLED IN A CYLINDER, SHOCK STRUT, OR SIMILAR DEVICE TO REMOVE EXCESS OIL, DIRT, ICE, AND/OR FOREIGN MATERIAL FROM A PISTON, RAM, OR SLIDING ROD. EXCLUDES PACKING, PREFORMED; RING, PISTON; AND SEAL RING, METAL.
|
Manufacturer Information:
| 0AS-17 | 26303 | GREENE TWEED AND CO ADVANTEC DIV | | AN6231-17 | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE | | DRI-17 | 30438 | DELTA MFG AND SALES INC | | G-17 | 72637 | GAYLE GEORGE W AND SON | | FWR-3C-17 | 83908 | ACE PRODUCTS CO OF TOLEDO INC | | AN6231A17 | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE | | SRC-17 | 25942 | SCRAPPER RINGS CO DIV OF ROBERTS TOOL CO | | MIL-R-5049 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-S-5049 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS28776-17 | 88277 | THE BOEING COMPANY | | ISR-17 | 95725 | INDUSTRIAL SUPPLIES | | GI1171-17 | 96679 | GAD-JETS INC | | MS28776-17 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS28776M2-17 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| CROSS-SECTIONAL SHAPE STYLE | OUTSIDE GROOVED, STRAIGHT FACE | | INSIDE DIAMETER | 1.500 INCHES NOMINAL | | JOINT STYLE | DIAGONAL JOINT | | OUTSIDE DIAMETER | 1.777 INCHES MINIMUM AND 1.782 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-679 COMP 1 FED SPEC 1ST MATERIAL RESPONSE OR QQ-B-750,COMP A,HARD FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-620,COMP 3,4,5 HARD FED SPEC 1ST MATERIAL RESPONSE OR QQ-B-728 CL A,HALF HARD,CL B,ALL TEMPERS FED SPEC 1ST MATERIAL RESPONSE OR QQ-B-726 CL A FED SPEC 1ST MATERIAL RESPONSE OR QQ-B-626 HARD FED SPEC 2ND MATERIAL RESPONSE OR QQ-C-591-ALL CLASSES,HALF HARD OR HARD FED SPEC 3RD MATERIAL RESPONSE OR MIL-P-25732 TYPE R,CL 2 MIL SPEC 4TH MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM | | MATERIAL | COPPER ALLOY OR SILICON OR RUBBER OVERALL | | NONDEFINITIVE SPEC/STD DATA | CL2 ITEM | | OUTER EDGE THICKNESS | 0.084 INCHES MINIMUM AND 0.094 INCHES MAXIMUM | | RING STYLE | CONCENTRIC | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | TEST DATA DOCUMENT | 81349-MIL-S-5049 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|