|
|
|
National Stock Number:
5330-00-862-9288
Federal Supply Class:
5330
National Item Identification Number:
008629288
Description:
GASKET
Detail:
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR.
|
Manufacturer Information:
| 114DS558-1 | 77272 | THE BOEING COMPANY | | 114DS558-1 | 81205 | THE BOEING COMPANY | | 40251 | 77969 | RUBBERCRAFT CORPORATION OF CALIFORNIA, LTD. | | SRCCA1445 | 95272 | STILLMAN SEAL CORPORATION | | 40251 | 98159 | RUBBERCRAFT CORPORATION OF CALIFORNIA, LTD DBA RUBBER TECK DIVISION USE CAGE CODE 77969 FOR CATALOGING |
|
Techincal Specification:
| ELONGATION PERCENTAGE | 250 MAXIMUM | | APERTURE DIAMETER | 2.995 INCHES MINIMUM AND 3.005 INCHES MAXIMUM | | BOLT CIRCLE DIAMETER | 4.375 INCHES MINIMUM AND 4.385 INCHES MAXIMUM | | CROSS-SECTIONAL THICKNESS | 0.125 INCHES NOMINAL | | HARDNESS RATING | 70.0 SHORE DUROMETER A NOMINAL OVERALL | | HOLE DIAMETER | 0.343 INCHES MINIMUM AND 0.351 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-327 T6 FED SPEC 1ST MATERIAL RESPONSE AND MIL-R-7362 TY 2 COMP A MIL SPEC 2ND MATERIAL RESPONSE OR SR 873A-70 FSCM 95272 MFR REF 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | ALUMINUM ALLOY 6061 AND RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL | | SPECIAL FEATURES | MTG HOLE LOCATION,2 HOLES 1.250 IN. EITHER SIDE OF HORIZONTAL CENTERLINE AND 1.875 IN. FROM VERTICAL CENTERLINE,APERTURE SLOTTED ON RIGHT SIDE ONHORIZONTAL CENTERLINE W/CENTER 1.750 IN. FROM VERTICAL CENTERLINE AND 0.380IN. END RADIUS,ONE ADJACENT APERTURE 0.499 IN. MIN,0.507 IN. MAX DIA ON HORIZONTAL CENTERLINE AND 2.312 IN. LEFTOF VERTICAL CENTERLINE,80 MICROINCHESAA MAX SURFACE FINISH BOTH SIDES,GASKET USED W/MIL-L-7808 LUBRICATING OIL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CHROMATE OVERALL | | TEMP RATING | -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT |
|
|