5330-00-967-9304, GASKET

National Stock Number:
5330-00-967-9304

Federal Supply Class:
5330

National Item Identification Number:
009679304

Description:
GASKET

Detail:
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR.

Manufacturer Information:

081861	83259	PARKER-HANNIFIN CORPORATION
10109207	18876	U S ARMY AVIATION AND MISSILE COMMAND

Techincal Specification:

APERTURE WIDTH	6.000 INCHES NOMINAL
APERTURE LENGTH	9.000 INCHES NOMINAL
BOLT HOLE QUANTITY	12
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	2.812 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	2.376 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED
CROSS-SECTIONAL THICKNESS	0.110 INCHES MINIMUM AND 0.150 INCHES MAXIMUM
CROSS-SECTIONAL SHAPE STYLE	METAL AND SYNTHETIC RUBBER
GAGE RING THICKNESS	0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM
HOLE DIAMETER	0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED
INSIDE CORNER RADIUS	0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM
OVERALL LENGTH	10.990 INCHES MINIMUM AND 11.010 INCHES MAXIMUM
OVERALL WIDTH	7.990 INCHES MINIMUM AND 8.010 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/11 FED SPEC 1ST MATERIAL RESPONSE AND MIL-S-6855,CL 1,GR 60 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
MATERIAL	ALUMINUM ALLOY 6061 AND RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
OUTSIDE CORNER RADIUS	0.984 INCHES MINIMUM AND 1.016 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	1.281 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	2.812 INCHES NOMINAL
STYLE DESIGNATOR	NON-CIRCULAR

Click here to Register for Free 30-day Trial