5330-01-041-9718, GASKET

National Stock Number:
5330-01-041-9718

Federal Supply Class:
5330

National Item Identification Number:
010419718

Description:
GASKET

Detail:
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR.

Manufacturer Information:

15594F

73760

ITT AEROSPACE CONTROLS LLC

Techincal Specification:

APERTURE DIAMETER	0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM
BOLT HOLE QUANTITY	4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	0.901 INCHES MINIMUM AND 0.911 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	0.901 INCHES MINIMUM AND 0.911 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED
CROSS-SECTIONAL SHAPE STYLE	SOLID SINGLE OR COMPOSITION
CROSS-SECTIONAL THICKNESS	0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM
HARDNESS RATING	55.0 SHORE DUROMETER A MINIMUM AND 70.0 SHORE DUROMETER A MAXIMUM OVERALL
HOLE DIAMETER	0.120 INCHES MINIMUM AND 0.135 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED
OVERALL LENGTH	1.180 INCHES MINIMUM AND 1.195 INCHES MAXIMUM
OVERALL WIDTH	1.180 INCHES MINIMUM AND 1.195 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-C-6183 CL 2 GR B MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	RUBBER SYNTHETIC AND CORK OVERALL
OUTSIDE CORNER RADIUS	0.060 INCHES MINIMUM AND 0.090 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.134 INCHES MINIMUM AND 0.147 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.134 INCHES MINIMUM AND 0.147 INCHES MAXIMUM
STYLE DESIGNATOR	NON-CIRCULAR

Click here to Register for Free 30-day Trial