5330-01-042-2397, GASKET

National Stock Number:
5330-01-042-2397

Federal Supply Class:
5330

National Item Identification Number:
010422397

Description:
GASKET

Detail:
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR.

Manufacturer Information:

MS90484-16-1	0U583	SAE INTERNATIONAL
MS90484-16-1	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SAE-AS90484	0U583	SAE INTERNATIONAL

Techincal Specification:

APERTURE DIAMETER	1.056 INCHES MINIMUM AND 1.071 INCHES MAXIMUM
BOLT HOLE QUANTITY	4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	0.964 INCHES MINIMUM AND 0.974 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	0.964 INCHES MINIMUM AND 0.974 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED
CROSS-SECTIONAL SHAPE STYLE	SOLID SINGLE OR COMPOSITION
CROSS-SECTIONAL THICKNESS	0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM
HOLE DIAMETER	0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED
OVERALL LENGTH	1.242 INCHES MINIMUM AND 1.258 INCHES MAXIMUM
OVERALL WIDTH	1.242 INCHES MINIMUM AND 1.258 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	ZZ-R-765 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	RUBBER SILICONE CLASS Q OVERALL
OUTSIDE CORNER RADIUS	0.120 INCHES MINIMUM AND 0.150 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.141 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.141 INCHES NOMINAL
STYLE DESIGNATOR	NON-CIRCULAR

Click here to Register for Free 30-day Trial