| BOLT HOLE QUANTITY | 2 |
| BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.600 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 4.300 INCHES MINIMUM AND 4.340 INCHES MAXIMUM |
| CRITICALITY CODE JUSTIFICATION | ZZZY |
| CROSS-SECTIONAL THICKNESS | 0.125 INCHES NOMINAL |
| CROSS-SECTIONAL SHAPE STYLE | SOLID SINGLE OR COMPOSITION |
| HOLE DIAMETER | 0.875 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | 905A99AB019 FSCM 01288 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 3.660 INCHES MINIMUM AND 3.700 INCHES MAXIMUM |
| OVERALL LENGTH | 11.660 INCHES MINIMUM AND 11.770 INCHES MAXIMUM |
| OVERALL WIDTH | 1.220 INCHES MINIMUM AND 1.260 INCHES MAXIMUM |
| MATERIAL | RUBBER SYNTHETIC OVERALL |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS |
| SPECIAL TEST FEATURES | SPECIAL QUALITY CONTROL TESTING |
| STYLE DESIGNATOR | NON-CIRCULAR |
| TEST DATA DOCUMENT | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |