5330-01-132-8578, GASKET

National Stock Number:
5330-01-132-8578

Federal Supply Class:
5330

National Item Identification Number:
011328578

Description:
GASKET

Detail:
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR.

Manufacturer Information:

115181-1	94271	LOCKHEED MARTIN CORP
LO-011328578	16236	DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS)
PO011328578	14153	DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA
LO1654	16236	DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS)

Techincal Specification:

APERTURE DIAMETER	2.750 INCHES NOMINAL
BOLT HOLE QUANTITY	4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	2.625 INCHES NOMINAL ALL HOLES
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	2.875 INCHES NOMINAL ALL HOLES
CRITICALITY CODE JUSTIFICATION	ZZZY
CROSS-SECTIONAL THICKNESS	0.062 INCHES NOMINAL
CROSS-SECTIONAL SHAPE STYLE	SOLID SINGLE OR COMPOSITION
HARDNESS RATING	45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
HOLE DIAMETER	0.250 INCHES NOMINAL ALL HOLES
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.312 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.312 INCHES NOMINAL
OVERALL LENGTH	3.500 INCHES NOMINAL
OVERALL WIDTH	3.250 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-G-1149,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	RUBBER CHLOROPRENE CLASS CR OVERALL
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS	REFERENCE NUMBER DIFFERENTIATING MATERIAL WILL BE IN ACCORDANCE WITH NAVAL INVENTORY CONTROL POINT ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTING SPECIFICATIONS AVAILABLE AT THE DLA ICP
SPECIAL FEATURES	ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER COLUMBUS PRODUCTION STANDARD NO. LO-011328578
STYLE DESIGNATOR	NON-CIRCULAR
TEST DATA DOCUMENT	81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

Click here to Register for Free 30-day Trial