|
|
|
National Stock Number:
5330-01-155-1913
Federal Supply Class:
5330
National Item Identification Number:
011551913
Description:
GASKET
Detail:
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR.
|
Manufacturer Information:
| 649222 | 83259 | PARKER-HANNIFIN CORPORATION | | 649222-1 | 83259 | PARKER-HANNIFIN CORPORATION | | 77C707884P001 | 03538 | LOCKHEED MARTIN CORPORATION | | 77C707884P004 | 03538 | LOCKHEED MARTIN CORPORATION | | 6492222 | 83259 | PARKER-HANNIFIN CORPORATION | | 649283-2 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 18 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.060 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.060 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | METAL AND SYNTHETIC RUBBER | | HARDNESS RATING | 55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL | | HOLE DIAMETER | 0.204 INCHES NOMINAL | | INSIDE CORNER RADIUS | 0.250 INCHES NOMINAL | | OUTSIDE CORNER RADIUS | 0.250 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.250 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.250 INCHES NOMINAL | | OVERALL LENGTH | 6.840 INCHES MINIMUM AND 6.880 INCHES MAXIMUM | | OVERALL WIDTH | 3.660 INCHES MINIMUM AND 3.700 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 FED SPEC 1ST MATERIAL RESPONSE AND MIL-R-6855 CL 1 GR 60 MIL SPEC 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | ALUMINUM ALLOY 6061 AND RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL |
|
|