|
|
|
National Stock Number:
5330-01-294-3084
Federal Supply Class:
5330
National Item Identification Number:
012943084
Description:
SEAL,NONMETALLIC CHANNEL
Detail:
An item fabricated from NONMETALLIC CHANNEL. It may be (1) formed to a specific shape with or without joints, (2) a single piece whose ends have been secured together to form a specific shape, or (3) a straight item fabricated to a specific length for a specific application with end cuts or joints. Items except for molded corners, end cut(s), and mounting facilities, such as mounting hole(s), slot(s), press fit buttons, and the like, must be one continuous cross section. It may have fabric, cord, or metal reinforcement. It is specifically designed for use in applications where there is no relative motion between joined parts. Excludes GASKET; GROMMET, NONMETALLIC; and PACKING, PREFORMED. For straight items with square end cuts and without mounting hole(s), slot(s), or press fit buttons, see NONMETALLIC CHANNEL.
|
Manufacturer Information:
| 128129-4 | 94271 | LOCKHEED MARTIN CORP | | 5NRP | P0045 | SO-REDES, PRODUTORA DE TELAS METALICAS, LDA. | | PO012943084 | 14153 | DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA | | PP012943084 | 14153 | DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA | | LO1588 | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) | | X-830 3.660 IN LG | 70485 | ATLANTIC INDIA RUBBER CO INC |
|
Techincal Specification:
| END CUT ANGLE | 45.0 DEGREES | | COLOR | BLACK | | CONSTRUCTION | SOLID | | CRITICALITY CODE JUSTIFICATION | ZZZY | | CROSS-SECTIONAL SHAPE STYLE | OPEN CHANNEL | | LEFT INSIDE ANGLE | 90.0 DEGREES NOMINAL | | LEFT OUTSIDE ANGLE | 90.0 DEGREES NOMINAL | | LEFT SIDE FLANGE HEIGHT | 0.500 INCHES NOMINAL | | LEFT SIDE FLANGE THICKNESS AT WEB | 0.031 INCHES NOMINAL | | LEFT SIDE FLANGE THICKNESS | 0.031 INCHES NOMINAL | | LEFT TIP STYLE | LEFT SQUARE END | | OVERALL LENGTH | 3.660 INCHES NOMINAL | | MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS | | RIGHT INSIDE ANGLE | 90.0 DEGREES NOMINAL | | RIGHT OUTSIDE ANGLE | 90.0 DEGREES NOMINAL | | RIGHT SIDE FLANGE HEIGHT | 0.500 INCHES NOMINAL | | RIGHT SIDE FLANGE THICKNESS AT WEB | 0.031 INCHES NOMINAL | | RIGHT SIDE FLANGE THICKNESS | 0.031 INCHES NOMINAL | | RIGHT TIP RELATIONSHIP WITH LEFT TIP | IDENTICAL | | SPECIAL TEST FEATURES | SPECIAL QUALITY CONTROL TESTING | | STYLE DESIGNATOR | STRIP | | WEB THICKNESS | 0.062 INCHES NOMINAL | | WEB WIDTH | 0.188 INCHES NOMINAL | | TEST DATA DOCUMENT | 81349-MIL-P-23199 SPECIFICATION SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|