5330-01-301-5998, GASKET

National Stock Number:
5330-01-301-5998

Federal Supply Class:
5330

National Item Identification Number:
013015998

Description:
GASKET

Detail:
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR.

Manufacturer Information:

JLM121	02750	EATON AEROSPACE LLC
LL-HK6-2219	14153	DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA
LO1359	16236	DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS)

Techincal Specification:

APERTURE WIDTH	3.720 INCHES MINIMUM AND 3.780 INCHES MAXIMUM
APERTURE LENGTH	6.880 INCHES NOMINAL
BOLT HOLE QUANTITY	12
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	1.562 INCHES NOMINAL ALL HOLES
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	1.850 INCHES NOMINAL ALL HOLES
CRITICALITY CODE JUSTIFICATION	ZZZY
CROSS-SECTIONAL SHAPE STYLE	SOLID SINGLE OR COMPOSITION
CROSS-SECTIONAL THICKNESS	0.016 INCHES NOMINAL
HARDNESS RATING	60.0 SHORE DUROMETER A NOMINAL OVERALL
HOLE DIAMETER	0.200 INCHES NOMINAL ALL HOLES
INSIDE CORNER RADIUS	0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM
OUTSIDE CORNER RADIUS	0.850 INCHES MINIMUM AND 0.910 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.250 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.250 INCHES NOMINAL
OVERALL LENGTH	7.880 INCHES NOMINAL
OVERALL WIDTH	4.720 INCHES MINIMUM AND 4.780 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	ZZ-R-765,CL 2 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	RUBBER SILICONE CLASS Q OVERALL
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS	A REFERENCE NUMBER DIFFERENTIATING MATERIAL WILL BE IN ACCORDANCE WITH NAVAL INVENTORY CONTROL POINT ACTIVITY HX QUALITY CONTROL. MANUFACTURING AND TESTING SPECIFICATIONS AVAILABLE AT THE DLA ICP.
SPECIAL FEATURES	ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER COLUMBUS PRODUCTION STANDARD NO. LO1359.
SPECIAL TEST FEATURES	SPECIAL QUALITY CONTROL TESTING
STYLE DESIGNATOR	NON-CIRCULAR
TEST DATA DOCUMENT	81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

Click here to Register for Free 30-day Trial