|
|
|
National Stock Number:
5330-01-466-1900
Federal Supply Class:
5330
National Item Identification Number:
014661900
Description:
RETAINER,PACKING
Detail:
An item designed to fit over a packing gland by mating with a surface of a second part which together will retain into a narrow groove or confined space the PACKING, PREFORMED or O-RING, or an item designed to fit over a rod or shaft, to mate with a stuffing box to confine PACKING MATERIAL. It may function as a static or dynamic seal retainer with the packing located on, around, or in the centerline direction of the rod or shaft axis. It may have holes or joints for mounting, be threaded or unthreaded. See also PACKING NUT and PACKING NUT, STUFFING TUBE.
|
Manufacturer Information:
| 21830 FIND 16 | 78062 | SARGENT AEROSPACE & DEFENSE, LLC | | AS8791/1-004 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | M8791/1-004 | 0U583 | SAE INTERNATIONAL | | M8791/1-004 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | M8791/1-004 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M8791/1-04 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M8791/1-04 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | SAE-AS8791/1 | 0U583 | SAE INTERNATIONAL | | V1E10369 ITEM 39 | 99517 | VACCO INDUSTRIES | | V5D10014-04 | 99517 | VACCO INDUSTRIES |
|
Techincal Specification:
| CENTER HOLE DIAMETER | 0.075 INCHES MINIMUM AND 0.076 INCHES MAXIMUM | | CROSS-SECTIONAL HEIGHT | 0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | SQUARE/RECTANGULAR | | CUT TYPE | DIAGONAL OVERALL | | JOINT TYPE | SCARF-BUTT OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AS8791 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE OVERALL | | PERIPHERAL DIAMETER | 0.179 INCHES MINIMUM AND 0.184 INCHES MAXIMUM | | SPECIAL FEATURES | SCARF (DIAGONAL) CUT WIDTH,MIN 0.000 INCH TO MAX 0.005 INCH;DIRECTION (ANGLE IN DEG) OF SCARFCUT IS OPTIONAL;USED IN PACKING GROVES CONFORMING TO MIL-G-5514 AND MIL-P-5514C,D,AND E REVISIONS |
|
|