|
|
|
National Stock Number:
5330-01-480-0057
Federal Supply Class:
5330
National Item Identification Number:
014800057
Description:
GASKET
Detail:
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR.
|
Manufacturer Information:
| 2051F52ITEM20 | 04804 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 5D89871H | 04804 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 5D89871H08 | 04804 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| APERTURE LENGTH | 7.960 INCHES NOMINAL | | APERTURE WIDTH | 3.960 INCHES NOMINAL | | BOLT HOLE QUANTITY | 8 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 4.750 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 4.375 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | SOLID SINGLE OR COMPOSITION | | CROSS-SECTIONAL THICKNESS | 0.125 INCHES NOMINAL | | HOLE DIAMETER | 0.375 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS3195E ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | RUBBER SILICONE CLASS Q OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.375 INCHES NOMINAL | | OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG LENGTH | 0.770 INCHES NOMINAL | | OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG WIDTH | 0.770 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.375 INCHES NOMINAL | | OVERALL LENGTH | 9.500 INCHES NOMINAL | | OVERALL WIDTH | 5.500 INCHES NOMINAL | | SPECIAL FEATURES | TWO BOLT HOLES LOCATED OUTSIDE THE DESCRIBED DIMENSIONS ONE ON EACH SIDE OF THE WIDTH ON ONE END 8.250 INCHES FROM THE BOLT HOLE CENTERS ALONG THE LENGTH FROM THE BOLT HOLE CENTERS ON THE OPPOSITE END | | STYLE DESIGNATOR | NON-CIRCULAR |
|
|