|
|
|
National Stock Number:
5330-01-557-7603
Federal Supply Class:
5330
National Item Identification Number:
015577603
Description:
SEAL,PLAIN
Detail:
A pliable rubber or composition ring-shaped element, split or jointless (solid) not encased in a metal shell, but having a spring, spreader and/or molded-in reinforcement. It is designed to be pressmounted between fixed and movable or moving parts to form a tight and effective seal.
|
Manufacturer Information:
| 597308 | 80201 | SKF USA INC. | | CR597308 | Z0GL9 | APPLIED INDUSTRIAL TECHNOLOGIES PTYLTD |
|
Techincal Specification:
| HOUSING BORE DIAMETER | 0.937 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | AXIAL CLAMP SEALS CT3 DESIGN | | SEAL WIDTH | 1.125 INCHES NOMINAL | | SPECIAL FEATURES | SKF AXIAL CLAMP SEALS ARE PRODUCED IN THREE DIFFERENT DESIGNS:CT1, CT3, AND CT4 DESIGN; THESE AXIAL CLAMP SEALS ARE MADE OF APPROPRIATELY PROFILED STRIPS OF NON-REINFORCED NITRILE RUBBER WHICH ARE HELD FIRMLY IN PLACE BY STAINLESS STEEL SCREW-TYPE CLAMPS; THEY ARE AVAILABLE IN THE DIAMETER RANGE 150 TO 4600 MM; THE SEALS DO NOT ROTATE BUT SEAL AXIALLY AGAINST A ROTATING COUNTERFACE; CT3 DESIGN:THE SEALS OF THE CT3 DESIGN DIFFER FROM THOSE OF THE CT1 DESIGN ONLY IN THE FORM OF THE SEALING LIP; THIS IS AGAIN FLAT BUT IS PROVIDED WITH ANNULAR GROOVES; THESE SERVE TO TRAP CONTAMINANTS WHICH MAY HAVE STARTED TO PENETRATE THE LIP/COUNTERFACE CONTACT; THE MAXIMUM OPERATING INTERFERENCE FOR THESE SEALS IS +4,8 MM; SHAFT:42.500 IN.; OD:43.688 IN.; WEIGHT:4.250 LBS |
|
|