| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CORNER RADIUS | 0.280 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.280 INCHES NOMINAL |
| FIRST LEG HOLE DIAMETER | 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN LOWER HOLE CENTERS ALONG WIDTH | 1.904 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 0.952 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.280 INCHES NOMINAL |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.120 INCHES NOMINAL |
| FIRST LEG WIDTH | 2.464 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.930 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5363 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| SECOND LEG CORNER RADIUS | 0.500 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.950 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.250 INCHES MINIMUM AND 0.257 INCHES MAXIMUM |
| SECOND LEG LENGTH | 1.000 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.120 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.950 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CORNER RADIUS |
| STYLE DESIGNATOR | ANGLE |