|
|
|
National Stock Number:
5340-00-231-8866
Federal Supply Class:
5340
National Item Identification Number:
002318866
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 2551947 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 0.500 INCHES MINIMUM AND 0.506 INCHES MAXIMUM | | CENTER SECTION THICKNESS | 0.060 INCHES MINIMUM AND 0.066 INCHES MAXIMUM | | CENTER SECTION WIDTH | 3.810 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | FIRST LEG HOLE DIAMETER | 0.143 INCHES MINIMUM AND 0.149 INCHES MAXIMUM | | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 3.310 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.160 INCHES NOMINAL | | FIRST LEG STYLE | SQUARE | | FIRST LEG THICKNESS | 0.060 INCHES MINIMUM AND 0.066 INCHES MAXIMUM | | FIRST LEG WIDTH | 3.810 INCHES NOMINAL | | FIRST LEG LENGTH | 0.440 INCHES MINIMUM AND 0.446 INCHES MAXIMUM | | MATERIAL | ALUMINUM ALLOY 5052 | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG LENGTH | 0.740 INCHES NOMINAL | | SECOND LEG THICKNESS | 0.060 INCHES MINIMUM AND 0.066 INCHES MAXIMUM | | SECOND LEG WIDTH | 3.810 INCHES NOMINAL | | SECOND LEG STYLE | SQUARE | | STYLE DESIGNATOR | DOUBLE ANGLE | | SURFACE TREATMENT | ANODIZE |
|
|