| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.169 INCHES MINIMUM AND 0.173 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.391 INCHES MINIMUM AND 1.394 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.234 INCHES MINIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.172 INCHES MINIMUM AND 0.174 INCHES MAXIMUM |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| FIRST LEG WIDTH | 1.734 INCHES MINIMUM AND 1.766 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.984 INCHES MINIMUM AND 1.016 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-255/7 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5052 |
| SECOND LEG THICKNESS | 0.130 INCHES MINIMUM AND 0.137 INCHES MAXIMUM |
| SECOND LEG WIDTH | 1.734 INCHES MINIMUM AND 1.748 INCHES MAXIMUM |
| SECOND LEG LENGTH | 2.172 INCHES MINIMUM AND 2.203 INCHES MAXIMUM |
| SECOND LEG STYLE | SQUARE |
| SPECIAL FEATURES | ITEMS FURNISHED AS ACCESSORIES: 4 CLINCH NUTS |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT | ENAMEL |