| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 3.500 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.500 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 1.500 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.120 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.438 INCHES MINIMUM AND 0.469 INCHES MAXIMUM |
| FIRST LEG WIDTH | 6.500 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 1.375 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 1.375 INCHES NOMINAL |
| SECOND LEG LENGTH | 1.750 INCHES NOMINAL |
| SECOND LEG HOLE DIAMETER | 0.344 INCHES MINIMUM AND 0.360 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.120 INCHES NOMINAL |
| SECOND LEG WIDTH | 6.500 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | TT-E-529 FED SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ENAMEL |