|
|
|
National Stock Number:
5340-00-302-3831
Federal Supply Class:
5340
National Item Identification Number:
003023831
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 652-216 | 26687 | TELEDYNE BROWN ENGINEERING, INC. | | MS8358 | 26687 | TELEDYNE BROWN ENGINEERING, INC. | | MS8358 | 80249 | BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 0.260 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.050 INCHES NOMINAL | | CENTER SECTION WIDTH | 0.500 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG THICKNESS | 0.050 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059,1/4 HARD,COMP G MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 302 | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | SECOND LEG HOLE DIAMETER | 0.157 INCHES NOMINAL | | SECOND LEG LENGTH | 0.469 INCHES NOMINAL | | SECOND LEG STYLE | SQUARE | | SECOND LEG THICKNESS | 0.050 INCHES NOMINAL | | SECOND LEG WIDTH | 0.500 INCHES NOMINAL | | STYLE DESIGNATOR | DOUBLE ANGLE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | S-119,CAGEC 80249 MFR REF SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PASSIVATE |
|
|