|
|
|
National Stock Number:
5340-00-307-2656
Federal Supply Class:
5340
National Item Identification Number:
003072656
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 3P22003-269 | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 0.120 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.063 INCHES NOMINAL | | CENTER SECTION WIDTH | 0.700 INCHES NOMINAL | | FABRICATION METHOD | FORMED | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE | | FIRST LEG STYLE | SQUARE | | FIRST LEG THICKNESS | 0.063 INCHES NOMINAL | | FIRST LEG WIDTH | 0.700 INCHES NOMINAL | | FIRST LEG LENGTH | 0.313 INCHES NOMINAL | | HEAT TREATMENT | O-ANNEALED, RECRYSTALLIZED | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 2024 | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | NO HOLE | | SECOND LEG HOLE DIAMETER | 0.193 INCHES MINIMUM AND 0.199 INCHES MAXIMUM | | SECOND LEG LENGTH | 0.850 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.350 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.350 INCHES NOMINAL | | SECOND LEG THICKNESS | 0.063 INCHES NOMINAL | | SECOND LEG WIDTH | 0.700 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | SQUARE | | STYLE DESIGNATOR | DOUBLE ANGLE |
|
|