|
|
|
National Stock Number:
5340-00-324-6172
Federal Supply Class:
5340
National Item Identification Number:
003246172
Description:
CLEVIS,ROD END
Detail:
A forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
|
Manufacturer Information:
| 123CM10056-511 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 123CM10056-511 | 79RG9 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| CRITICALITY CODE JUSTIFICATION | AAUB | | DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END | 2.937 INCHES NOMINAL | | END RADIUS | 0.437 INCHES NOMINAL | | FORK SPAN WIDTH | 0.487 INCHES MINIMUM AND 0.492 INCHES MAXIMUM | | FORK ARM THICKNESS | 0.125 INCHES NOMINAL | | FORK DEPTH | 1.125 INCHES NOMINAL | | HOLE DIAMETER | 0.2497 INCHES MINIMUM AND 0.2507 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/9,T7351 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | ALUMINUM ALLOY OVERALL | | OVERALL WIDTH | 0.737 INCHES MINIMUM AND 0.742 INCHES MAXIMUM | | SHANK DIAMETER | 0.510 INCHES MINIMUM AND 0.512 INCHES MAXIMUM | | SHANK LENGTH | 1.812 INCHES NOMINAL | | STYLE DESIGNATOR | CLEVIS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE AND MIL-P-23377 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE AND PAINT OVERALL | | TEST DATA DOCUMENT | 81349-MIL-I-6866 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|