| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.600 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.396 INCHES MINIMUM AND 0.403 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.150 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.200 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.150 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | LS2454-4,TEMPER T73,FSCM 36659 MFR REF SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY |
| SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG LENGTH | 1.600 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| SECOND LEG HOLE DIAMETER | 0.193 INCHES MINIMUM AND 0.204 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG LENGTH | 1.400 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.380 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.600 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.150 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.200 INCHES NOMINAL |
| SECOND LEG LENGTH | 3.400 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | LC+77-2037,CLASS 1,GRADE A,TYPE 1,FSCM 36659 MFR REF SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ANODIZE |