| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.063 INCHES NOMINAL |
| FIRST LEG WIDTH | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| HEAT TREATMENT | H-34 STRAIN HARDENED |
| MATERIAL | ALUMINUM ALLOY 5052 |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.700 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.142 INCHES MINIMUM AND 0.149 INCHES MAXIMUM |
| SECOND LEG LENGTH | 0.373 INCHES MINIMUM AND 0.393 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.150 INCHES MINIMUM AND 0.170 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.130 INCHES MINIMUM AND 0.170 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.063 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171,FINISH 7.3.1 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ANODIZE |