| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.800 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.143 INCHES MINIMUM AND 0.149 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.044 INCHES MINIMUM AND 0.056 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.550 INCHES NOMINAL |
| HEAT TREATMENT | T-6 SOLUTION HEAT TREATED |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/11,T6 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 7075 |
| MOUNTING HOLE TYPE | COUNTERSUNK |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.300 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.350 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.550 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.044 INCHES MINIMUM AND 0.056 INCHES MAXIMUM |
| SECOND LEG WIDTH | 2.300 INCHES NOMINAL |
| SECOND LEG LENGTH | 1.250 INCHES NOMINAL |
| SECOND LEG STYLE | SQUARE |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | TT-P-1757 FED SPEC 1ST TREATMENT RESPONSE AND MIL-C-6183,T 2,CL 1,GR C MIL SPEC 2ND TREATMENT RESPONSE |
| SURFACE TREATMENT | PRIMER |