| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG END RADIUS | 0.215 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.193 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.260 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.160 INCHES MINIMUM AND 0.240 INCHES MAXIMUM |
| FIRST LEG STYLE | END RADIUS |
| FIRST LEG THICKNESS | 0.040 INCHES NOMINAL |
| FIRST LEG WIDTH | 0.360 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.660 INCHES MINIMUM AND 0.740 INCHES MAXIMUM |
| HEAT TREATMENT | T-3 SOLUTION HEAT TREATED |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 2024 |
| SECOND LEG END RADIUS | 0.215 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.193 INCHES NOMINAL |
| SECOND LEG LENGTH | 0.660 INCHES MINIMUM AND 0.740 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.260 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.160 INCHES MINIMUM AND 0.240 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.040 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.360 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | END RADIUS |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT | PAINT |