|
|
|
National Stock Number:
5340-00-343-4261
Federal Supply Class:
5340
National Item Identification Number:
003434261
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 60-2165-3 | 72914 | GRIMES AEROSPACE COMPANY |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 0.066 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.018 INCHES NOMINAL | | CENTER SECTION WIDTH | 0.187 INCHES NOMINAL | | FABRICATION METHOD | MACHINED | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE | | FIRST LEG LENGTH | 0.157 INCHES NOMINAL | | FIRST LEG WIDTH | 0.187 INCHES NOMINAL | | FIRST LEG STYLE | SQUARE | | FIRST LEG THICKNESS | 0.018 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 304 | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.125 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.093 INCHES NOMINAL | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | SECOND LEG HOLE DIAMETER | 0.098 INCHES NOMINAL | | SECOND LEG LENGTH | 0.205 INCHES NOMINAL | | SECOND LEG STYLE | SQUARE | | SECOND LEG THICKNESS | 0.018 INCHES NOMINAL | | SECOND LEG WIDTH | 0.187 INCHES NOMINAL | | STYLE DESIGNATOR | DOUBLE ANGLE |
|
|