|
|
|
National Stock Number:
5340-00-344-2956
Federal Supply Class:
5340
National Item Identification Number:
003442956
Description:
BRACKET,ANGLE
Detail:
A ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
|
Manufacturer Information:
| 446169 | 11449 | TURBO POWER & MARINE SYSTEM INC SUB OF UNITED TECHNOLOGIES CORP | | 446169 | 52661 | RTX CORPORATION | | 446169 | 77445 | RTX CORPORATION |
|
Techincal Specification:
| CRITICALITY CODE JUSTIFICATION | FEAT | | FIRST LEG ANGLE | 130.0 DEGREES NOMINAL | | FIRST LEG END RADIUS | 0.375 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG HOLE DIAMETER | 0.224 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL | | FIRST LEG WIDTH | 0.510 INCHES NOMINAL | | FIRST LEG STYLE | END RADIUS | | FIRST LEG THICKNESS | 0.062 INCHES NOMINAL | | FSC APPLICATION DATA | ENGINE,JET,AIRCRAFT | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 410 | | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.009 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL | | SECOND LEG CORNER RADIUS | 0.250 INCHES NOMINAL | | SECOND LEG OFFSET ANGLE | 80.9 DEGREES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | SECOND LEG HOLE DIAMETER | 0.286 INCHES NOMINAL | | SECOND LEG STYLE | CORNER RADIUS | | SECOND LEG THICKNESS | 0.062 INCHES NOMINAL | | SECOND LEG WIDTH | 1.509 INCHES NOMINAL | | SPECIAL FEATURES | THIS PART MEETS THE Y REQUIREMENTS DUE TO CRITICAL FEATURES, TOLERANCES, FIT RESTRICTIONS, MATERIAL PROPERTIES AND MANUFACTURING PROCESS. FAILURE COULD RESULT IN LOSS OR SUBSTANTIAL DAMAGE TO WEAPON SYSTEM, DEATH OR SERIOUS INJURY | | STYLE DESIGNATOR | OFFSET ANGLE |
|
|