| FIRST LEG ANGLE | 45.0 DEGREES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.216 INCHES MINIMUM AND 0.226 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.500 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.165 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.647 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4911 NATIONAL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | TITANIUM ALLOY |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.375 INCHES NOMINAL |
| SECOND LEG LENGTH | 3.510 INCHES NOMINAL |
| SECOND LEG OFFSET ANGLE | 5.0 DEGREES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 0.400 INCHES MINIMUM AND 0.420 INCHES MAXIMUM |
| SECOND LEG SLOT WIDTH | 0.216 INCHES MINIMUM AND 0.226 INCHES MAXIMUM |
| SECOND LEG END RADIUS | 0.250 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| SECOND LEG STYLE | END RADIUS AND TAPERED |
| SECOND LEG THICKNESS | 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| STYLE DESIGNATOR | OFFSET ANGLE |