| CRITICALITY CODE JUSTIFICATION | FEAT |
| FIRST LEG ANGLE | 84.75 DEGREES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.216 INCHES MINIMUM AND 0.226 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.500 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.840 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4911 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | TITANIUM ALLOY |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.030 INCHES MINIMUM AND 1.040 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.312 INCHES NOMINAL |
| SECOND LEG LENGTH | 1.950 INCHES NOMINAL |
| SECOND LEG SLOT LENGTH | 0.800 INCHES MINIMUM AND 0.820 INCHES MAXIMUM |
| SECOND LEG SLOT WIDTH | 0.216 INCHES MINIMUM AND 0.226 INCHES MAXIMUM |
| SECOND LEG END RADIUS | 0.312 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| SECOND LEG STYLE | END RADIUS AND TAPERED |
| SECOND LEG THICKNESS | 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| SPECIAL FEATURES | FAILURE OF THIS ITEM COULD RESULT IN LOSS OR SUBSTANTIAL DAMAGE TO THE AIR VEHICLE OR WEAPON SYSTEM, OR DEATH OR SERIOUS INJURY TO PERSONNEL |
| STYLE DESIGNATOR | ANGLE |