| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG END RADIUS | 0.250 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.810 INCHES NOMINAL |
| FIRST LEG STYLE | END RADIUS AND TAPERED |
| FIRST LEG THICKNESS | 0.056 INCHES MINIMUM AND 0.059 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 321 |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.598 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| SECOND LEG CORNER RADIUS | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.098 INCHES NOMINAL |
| SECOND LEG LENGTH | 2.060 INCHES MINIMUM AND 2.092 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM |
| SECOND LEG STYLE | CORNER RADIUS |
| SECOND LEG THICKNESS | 0.056 INCHES MINIMUM AND 0.059 INCHES MAXIMUM |
| SECOND LEG WIDTH | 1.066 INCHES MINIMUM AND 1.130 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |