| CENTER SECTION HEIGHT | 0.718 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.0605 INCHES MINIMUM AND 0.0675 INCHES MAXIMUM |
| CENTER SECTION WIDTH | 1.000 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CORNER RADIUS | 0.125 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| FIRST LEG LENGTH | 0.2825 INCHES MINIMUM AND 0.4105 INCHES MAXIMUM |
| FIRST LEG WIDTH | 1.000 INCHES NOMINAL |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.0605 INCHES MINIMUM AND 0.0675 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B103 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | COPPER ALLOY 511 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN LOWER HOLE CENTERS ALONG WIDTH | 0.686 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN UPPER HOLE CENTERS ALONG WIDTH | 0.686 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.125 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.125 INCHES NOMINAL |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG CORNER RADIUS | 0.125 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 0.030 INCHES MINIMUM AND 0.032 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.219 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| SECOND LEG HOLE DIAMETER | 0.143 INCHES MINIMUM AND 0.145 INCHES MAXIMUM |
| SECOND LEG LENGTH | 0.563 INCHES NOMINAL |
| SECOND LEG STYLE | CORNER RADIUS |
| SECOND LEG THICKNESS | 0.0605 INCHES MINIMUM AND 0.0675 INCHES MAXIMUM |
| SECOND LEG WIDTH | 1.100 INCHES NOMINAL |
| SPECIAL FEATURES | THREE SLITS IN FIRST LEG; HOLES ADJACENT TO SECOND LEG LG 0.087 IN. MIN 0.091 IN. MAX DIA; ADDITIONAL 0.180 IN. NOM DIA HOLE IN SECOND LEG ON 0.500 IN. CENTERLINE; ONE HOLE 0.093 DJA COUNTERSUNK TO 0.109 IN. DIA ON BOTH SIDES LOCATED ON CENTER SECTION |
| STYLE DESIGNATOR | DOUBLE ANGLE |