| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG END RADIUS | 0.459 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.404 INCHES MINIMUM AND 0.413 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.3750 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.3750 INCHES NOMINAL |
| FIRST LEG WIDTH | 0.7500 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.8120 INCHES NOMINAL |
| FIRST LEG STYLE | END RADIUS |
| FIRST LEG THICKNESS | 0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS6350,COND A ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.3750 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.3750 INCHES NOMINAL |
| SECOND LEG LENGTH | 1.4370 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG END RADIUS | 0.459 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.217 INCHES MINIMUM AND 0.225 INCHES MAXIMUM |
| SECOND LEG STYLE | END RADIUS |
| SECOND LEG THICKNESS | 0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| SECOND LEG WIDTH | 0.7500 INCHES NOMINAL |
| SPECIAL FEATURES | HEAT TREATMENT: QUENCHED AND TEMPERED |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CADMIUM |