| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG LENGTH | 0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 0.182 INCHES MINIMUM AND 0.192 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.500 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.130 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| FIRST LEG WIDTH | 0.940 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.560 INCHES MINIMUM AND 1.620 INCHES MAXIMUM |
| FIRST LEG STYLE | SQUARE |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.375 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.250 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.253 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM |
| SECOND LEG LENGTH | 3.850 INCHES MINIMUM AND 3.910 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.160 INCHES MINIMUM AND 0.170 INCHES MAXIMUM |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.130 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| SECOND LEG WIDTH | 0.940 INCHES NOMINAL |
| SPECIAL FEATURES | ONE 0.500 IN. DIA HOLE IN SECOND LEG,0.500 IN. DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH,0.500 IN. DISTANT FROM EDGE TO HOLE CENTER ALONG WIDTH,ONE RECTANGULAR HOLE ON CENTER LINE WITH ROUND HOLE,0.500 IN. LONG,0.310 IN. WIDTH,2.750 IN. C TO C OF HOLES |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT | PAINT |