| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| FIRST LEG END RADIUS | 0.500 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.278 INCHES MINIMUM AND 0.283 INCHES MAXIMUM |
| FIRST LEG STYLE | END RADIUS |
| FIRST LEG THICKNESS | 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| FIRST LEG WIDTH | 0.500 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM |
| FIRST LEG SLOT LENGTH | 0.278 INCHES MINIMUM AND 0.288 INCHES MAXIMUM |
| FIRST LEG SLOT WIDTH | 0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6350 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 4130 |
| SECOND LEG END RADIUS | 0.500 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| SECOND LEG LENGTH | 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.278 INCHES MINIMUM AND 0.283 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| SECOND LEG WIDTH | 0.500 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 0.278 INCHES MINIMUM AND 0.288 INCHES MAXIMUM |
| SECOND LEG SLOT WIDTH | 0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| SECOND LEG STYLE | END RADIUS |
| SPECIAL FEATURES | HEAT TREATMENT: QUENCHED AND TEMPERED |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CADMIUM |