| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CORNER RADIUS | 0.190 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.220 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.169 INCHES MINIMUM AND 0.177 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.750 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.190 INCHES NOMINAL |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.063 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.190 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.560 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8,TEMPER T4 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG CORNER RADIUS | 0.190 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.500 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.500 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| SECOND LEG HOLE DIAMETER | 0.108 INCHES MINIMUM AND 0.114 INCHES MAXIMUM |
| SECOND LEG LENGTH | 1.000 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.114 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.340 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.063 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.190 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CORNER RADIUS |
| SPECIAL FEATURES | HOLE CENTERED BETWEEN 4 HOLES 0.438 IN. DIA |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMATE |