| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| FIRST LEG END RADIUS | 0.250 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.281 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| FIRST LEG STYLE | END RADIUS AND TAPERED |
| FIRST LEG THICKNESS | 0.073 INCHES MINIMUM AND 0.087 INCHES MAXIMUM |
| FIRST LEG WIDTH | 0.815 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 321 |
| SECOND LEG CORNER RADIUS | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.228 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.220 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.073 INCHES MINIMUM AND 0.087 INCHES MAXIMUM |
| SECOND LEG WIDTH | 1.720 INCHES NOMINAL |
| SECOND LEG LENGTH | 1.050 INCHES MINIMUM AND 1.110 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CORNER RADIUS |
| STYLE DESIGNATOR | ANGLE |