| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CORNER RADIUS | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.344 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.245 INCHES MINIMUM AND 1.255 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.103 INCHES MINIMUM AND 0.121 INCHES MAXIMUM |
| FIRST LEG WIDTH | 1.845 INCHES MINIMUM AND 1.895 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.860 INCHES MINIMUM AND 0.910 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 321 |
| SECOND LEG END RADIUS | 0.360 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.418 INCHES MINIMUM AND 0.428 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.360 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.103 INCHES MINIMUM AND 0.121 INCHES MAXIMUM |
| SECOND LEG LENGTH | 2.140 INCHES MINIMUM AND 2.180 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | END RADIUS AND TAPERED |
| STYLE DESIGNATOR | ANGLE |