|
|
|
National Stock Number:
5340-00-630-2230
Federal Supply Class:
5340
National Item Identification Number:
006302230
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 25659 | 24235 | WILLIAMS INTERNATIONAL CO., L.L.C. |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 1.750 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.120 INCHES NOMINAL | | CENTER SECTION WIDTH | 0.888 INCHES NOMINAL | | FIRST LEG ANGLE | 66.0 DEGREES NOMINAL | | FIRST LEG CORNER RADIUS | 0.801 INCHES NOMINAL | | FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 0.450 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.440 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | THREE HOLES | | FIRST LEG HOLE DIAMETER | 0.208 INCHES MINIMUM AND 0.218 INCHES MAXIMUM | | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 2.500 INCHES NOMINAL | | FIRST LEG DISTANCE BETWEEN LOWER HOLE CENTERS ALONG WIDTH | 1.250 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL | | FIRST LEG STYLE | CORNER RADIUS | | FIRST LEG THICKNESS | 0.028 INCHES MINIMUM AND 0.036 INCHES MAXIMUM | | FIRST LEG WIDTH | 0.880 INCHES NOMINAL | | FIRST LEG LENGTH | 1.000 INCHES NOMINAL | | MATERIAL | STEEL COMP 304 | | SECOND LEG ANGLE | 50.0 DEGREES NOMINAL | | SECOND LEG LENGTH | 0.700 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL | | SECOND LEG THICKNESS | 0.029 INCHES NOMINAL |
|
|