| CENTER SECTION THICKNESS | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| CENTER SECTION WIDTH | 1.620 INCHES MINIMUM AND 1.700 INCHES MAXIMUM |
| FABRICATION METHOD | MACHINED |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.281 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.300 INCHES MINIMUM AND 1.320 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN UPPER HOLE CENTERS ALONG WIDTH | 1.300 INCHES MINIMUM AND 1.320 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.240 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.190 INCHES MINIMUM AND 0.370 INCHES MAXIMUM |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| FIRST LEG WIDTH | 2.010 INCHES MINIMUM AND 2.090 INCHES MAXIMUM |
| FIRST LEG LENGTH | 1.415 INCHES MINIMUM AND 1.555 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 321 |
| SECOND LEG ANGLE | 135.0 DEGREES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.455 INCHES MINIMUM AND 0.525 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| SECOND LEG SLOT LENGTH | 0.710 INCHES MINIMUM AND 0.730 INCHES MAXIMUM |
| SECOND LEG SLOT WIDTH | 0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM |
| SECOND LEG STYLE | END RADIUS AND TAPERED |
| STYLE DESIGNATOR | DOUBLE ANGLE |