| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CORNER RADIUS | 0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.281 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.090 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.540 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.082 INCHES MINIMUM AND 0.098 INCHES MAXIMUM |
| FIRST LEG WIDTH | 1.960 INCHES MINIMUM AND 2.000 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.810 INCHES MINIMUM AND 0.850 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 321 |
| SECOND LEG END RADIUS | 0.500 INCHES MINIMUM AND 0.540 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| SECOND LEG LENGTH | 0.810 INCHES MINIMUM AND 0.850 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES MINIMUM AND 0.540 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.770 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.082 INCHES MINIMUM AND 0.098 INCHES MAXIMUM |
| SECOND LEG WIDTH | 1.540 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 0.500 INCHES MINIMUM AND 0.540 INCHES MAXIMUM |
| SECOND LEG SLOT WIDTH | 0.280 INCHES MINIMUM AND 0.300 INCHES MAXIMUM |
| SECOND LEG STYLE | END RADIUS AND TAPERED |
| STYLE DESIGNATOR | ANGLE |