| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.059 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| FIRST LEG WIDTH | 0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| SECOND LEG LENGTH | 0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.315 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.385 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 0.370 INCHES NOMINAL |
| SECOND LEG SLOT WIDTH | 0.200 INCHES NOMINAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.059 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ANODIZE |