|
|
|
National Stock Number:
5340-00-663-1477
Federal Supply Class:
5340
National Item Identification Number:
006631477
Description:
HINGE,BUTT
Detail:
A hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
|
Manufacturer Information:
| ANSI A156.20 A8133 | 80204 | AMERICAN NATIONAL STANDARDS INSTITUTE INCORPORATED | | BHMA-A156.20 | 41280 | BUILDERS HARDWARE MFRS ASSN INC | | BHMA-A156.20 A81313 1-1/4IN | 41280 | BUILDERS HARDWARE MFRS ASSN INC | | FFH116 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC |
|
Techincal Specification:
| PIN REMOVABILITY | REMOVABLE | | REVERSIBLE FEATURE | NOT INCLUDED | | KNUCKLE QUANTITY | 5 | | PERFORMANCE TYPE | REGULAR DUTY | | MATERIAL AND LOCATION | STEEL PIN AND | | STEEL, WROUGHT BODY AND | | STEEL, WROUGHT BUTTON TIP | | STYLE DESIGNATOR | BUTT | | SURFACE TREATMENT AND LOCATION | PRIMED FOR PAINT, FF-H-116, USP BODY AND | | PRIMED FOR PAINT, FF-H-116, USP BUTTON TIP | | MATERIAL THICKNESS | 0.089 INCHES NOMINAL | | MOUNTING HOLE DIAMETER | 0.169 INCHES NOMINAL | | BODY WIDTH | 2.500 INCHES NOMINAL | | PIN CENTER TO BODY EDGE DISTANCE | 1.250 INCHES NOMINAL | | PIN TIP STYLE | FLAT BUTTON | | HINGE MOUNTING TYPE | FULL MORTISE | | RISING PIN | NOT INCLUDED | | KNUCKLE TYPE | FRICTION | | MOUNTING HOLE QUANTITY | 6 | | NONDEFINITIVE SPEC/STD DATA | 2127 TYPE | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 81348 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | FFH116 |
|
|