| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CORNER RADIUS | 0.125 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.391 INCHES MINIMUM AND 0.422 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.192 INCHES MINIMUM AND 0.203 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| FIRST LEG WIDTH | 0.797 INCHES MINIMUM AND 0.828 INCHES MAXIMUM |
| FIRST LEG LENGTH | 1.109 INCHES MINIMUM AND 1.141 INCHES MAXIMUM |
| HEAT TREATMENT | T-4 SOLUTION HEAT TREATED |
| SECOND LEG CORNER RADIUS | 0.125 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.422 INCHES MINIMUM AND 0.453 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.138 INCHES NOMINAL |
| SECOND LEG LENGTH | 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.172 INCHES MINIMUM AND 0.203 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| SECOND LEG WIDTH | 0.797 INCHES MINIMUM AND 0.828 INCHES MAXIMUM |
| SECOND LEG STYLE | CORNER RADIUS |
| SPECIAL FEATURES | THREADED HOLES IN SECOND LEG |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ANODIZE |