| CENTER SECTION HEIGHT | 0.4400 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.0520 INCHES MINIMUM AND 0.0680 INCHES MAXIMUM |
| CENTER SECTION WIDTH | 0.7500 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG END RADIUS | 0.0600 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.2060 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.2500 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.2500 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.0520 INCHES MINIMUM AND 0.0680 INCHES MAXIMUM |
| FIRST LEG WIDTH | 0.5000 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.6700 INCHES NOMINAL |
| FIRST LEG STYLE | END RADIUS |
| HEAT TREATMENT | ANNEALED |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS6350 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.2500 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.2500 INCHES NOMINAL |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | END RADIUS |
| SECOND LEG THICKNESS | 0.0520 INCHES MINIMUM AND 0.0680 INCHES MAXIMUM |
| SECOND LEG END RADIUS | 0.0600 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.2660 INCHES NOMINAL |
| SECOND LEG LENGTH | 0.4400 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.5000 INCHES NOMINAL |
| STYLE DESIGNATOR | DOUBLE ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CADMIUM |