| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.219 INCHES MINIMUM AND 1.281 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.193 INCHES MINIMUM AND 0.208 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM |
| FIRST LEG THICKNESS | 0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| FIRST LEG WIDTH | 2.969 INCHES MINIMUM AND 3.031 INCHES MAXIMUM |
| FIRST LEG LENGTH | 1.719 INCHES MINIMUM AND 1.781 INCHES MAXIMUM |
| FIRST LEG STYLE | SQUARE |
| HEAT TREATMENT | T-6 SOLUTION HEAT TREATED |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11,T6 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.156 INCHES MINIMUM AND 0.219 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.531 INCHES MINIMUM AND 0.594 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 1.594 INCHES MINIMUM AND 1.656 INCHES MAXIMUM |
| SECOND LEG LENGTH | 2.219 INCHES MINIMUM AND 2.281 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.193 INCHES MINIMUM AND 0.208 INCHES MAXIMUM |
| SECOND LEG WIDTH | 2.969 INCHES MINIMUM AND 3.031 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMATE |